No.14 Waihuan Road, CBD, Zhengzhou, China

+86-18703635966

icon

As a manufacturer of aluminum circle discs, we produce 1050, 1060, and 1100 H24 aluminum alloy circles for cookware forming, lighting components, traffic signs, electrical parts, and general deep-drawing applications. Our bright surface aluminum circles are manufactured from controlled aluminum coil stock, blanked with stable dimensional accuracy, and inspected before packing for export.

For buyers searching for ASTM 1050, 1060, and 1100 H24 aluminum circles, it is important to distinguish between alloy designation and material specification. The 1050, 1060, and 1100 grades are Aluminum Association alloy designations. ASTM requirements, where specified by the buyer, are generally evaluated against applicable aluminum sheet and plate standards such as ASTM B209, together with the agreed dimensions, temper, inspection method, and delivery condition.

Our factory supplies aluminum discs in H24 temper with a clean, bright rolled surface suitable for subsequent spinning, stamping, drawing, anodizing, coating, and polishing operations. We also provide customized diameter, thickness, edge condition, and packaging according to the forming route and end-use requirements.

1060 aluminum circle

Product Overview

H24 aluminum circles are strain-hardened and partially annealed products. This temper provides greater strength than fully annealed O temper material while retaining useful forming capability for applications that do not require extreme deep drawing. In cookware production, H24 aluminum discs are commonly selected for stamped components, shallow-drawn items, lids, and parts requiring improved rigidity after forming.

Our bright surface finish is produced through controlled rolling, coil handling, blanking, and interleaving practices. The finished aluminum circle surface is uniform and free from defects that may interfere with normal fabrication, including severe scratches, roller marks, embedded debris, oil staining, edge damage, or excessive waviness. Surface acceptance criteria can be adjusted for polished cookware, coated cookware, lighting reflectors, or industrial components.

We manufacture both standard and custom aluminum circle disc sizes. Material selection is based on the customer's mechanical forming method, surface expectation, thickness requirement, and final processing sequence.

Alloy Comparison: 1050, 1060, and 1100 Aluminum Circles

The 1000 series aluminum alloys used for circle production have high aluminum content, good corrosion resistance, high thermal conductivity, and good workability. Their differences are primarily related to minimum aluminum content and impurity limits.

AlloyNominal Aluminum ContentMain CharacteristicsTypical H24 Applications
105099.5% minimumGood formability, thermal conductivity, corrosion resistanceCookware parts, lamp shades, signs, general spun products
106099.6% minimumHigh ductility, clean appearance, stable processing behaviorCookware discs, lighting components, electrical parts
110099.0% minimumGood workability and corrosion resistance, widely used commercial pure aluminumUtensils, reflectors, signs, chemical and general fabrication parts

A 1050 Aluminum Circle is commonly selected where reliable forming performance and economical material use are required. For applications requiring a slightly higher aluminum content and consistent processing behavior, our 1060 alloy is often specified. Our 1100 Aluminum Circle is also available for buyers requiring this established commercial-purity grade for fabrication and surface finishing.

Technical Parameters

The following ranges represent our typical manufacturing capability for H24 aluminum alloy circles. Final specifications are confirmed according to the purchase order, application, and applicable standard requirements.

ParameterTypical SpecificationRemarks
Alloy1050, 1060, 1100Other 1000 series grades available on request
TemperH24Strain hardened and partially annealed
Thickness0.40 mm to 6.00 mmThicker gauges subject to diameter and application review
Diameter80 mm to 1,500 mmCustomized diameters available
SurfaceBright rolled surfaceMill finish, protective film, or other finish by agreement
Edge ConditionSmooth blanked edgeBurr control based on thickness and production method
FlatnessControlled to agreed toleranceImportant for stamping, spinning, and automated feeding
Diameter ToleranceAccording to agreed size and thicknessInspection standard agreed before production
Coil or Sheet SourceAluminum coil or sheetSelected according to blanking method and end use
Standard ReferenceASTM B209 where applicableAlloy, temper, dimensions, and inspection requirements confirmed by order
PackagingPaper interleaving, plastic protection, export wooden palletHorizontal or vertical packing available

Bright Surface Finish and Surface Control

A bright surface aluminum disc is not simply a product with a visually reflective appearance. For industrial users, brightness must be supported by stable surface quality throughout the shipment. Our process begins with selected aluminum coil, followed by controlled slitting when required, precision blanking, handling protection, inspection, and export packing.

During production, we monitor surface cleanliness and protect circles from avoidable contact damage. For customers manufacturing non-stick cookware, polished utensils, lamp shades, or decorative components, surface consistency helps reduce downstream polishing, cleaning, and coating preparation work.

The degree of brightness should be specified according to the final application. A cookware blank intended for coating may require a clean, uniform mill-bright surface. A lighting reflector may require more restrictive visual criteria or additional finishing. We review the intended process before production to ensure that the material surface is suitable for the customer's manufacturing route.

Aluminum disc manufacturing process

Manufacturing Process for H24 Aluminum Circle Discs

Our aluminum circle manufacturing process is designed to maintain consistent dimensions and product condition from raw material to export packing.

  1. Raw material verification: We verify alloy, temper, thickness, coil condition, and documentation before processing.

  2. Coil preparation: Aluminum coil is slit or leveled when required to support the selected blanking process.

  3. Precision blanking: Circles are produced using suitable stamping equipment and tooling to achieve stable diameter, roundness, and edge quality.

  4. Surface protection: Material is handled with controlled contact points and interleaving practices to preserve the bright surface finish.

  5. Quality inspection: Our team checks dimensions, visual surface condition, edge quality, packaging condition, and identification.

  6. Export packaging: Finished aluminum discs are packed with moisture protection and reinforced pallets suitable for sea, rail, or road transport.

For large-diameter aluminum discs, tooling selection, material flatness, and stacking method become particularly important. We assess these details before confirming production so that the finished circles can be processed efficiently at the customer's facility.

Forming Performance of H24 Aluminum Circles

H24 is a practical temper for aluminum circle applications requiring moderate forming combined with improved stiffness. Compared with O temper, H24 material has higher strength and may be better suited to shallow drawing, pressing, stamping, and structural circular parts. However, it is not normally the first choice for severe deep drawing or high-wall cookware forming.

When selecting H24 aluminum circles, buyers should evaluate the drawing ratio, tool radius, lubrication method, press capacity, and final part geometry. For demanding deep-drawn cookware, fully annealed O temper may be more appropriate. For shallow pans, lids, lighting housings, sign blanks, and stamped industrial components, H24 can provide a balanced combination of formability and strength.

We can review the required application with customers before manufacturing. This helps determine the most suitable alloy, thickness, temper, blank diameter, and edge condition for the intended operation.

Typical Applications

Our 1050, 1060, and 1100 H24 aluminum circles are used in a broad range of industrial products, including:

  • Cookware lids, shallow pans, utensils, and coated cookware components.

  • Lamp shades, lighting housings, reflector bases, and decorative metal parts.

  • Traffic sign blanks and circular sign components.

  • Electrical enclosures, capacitor parts, heat-spreading components, and general stamped products.

  • Bottle cap components, cosmetic packaging parts, and circular closure blanks.

  • Spun metal components for ventilation, appliance, and architectural applications.

Aluminum discs application

Quality Assurance and Export Packaging

As a factory, we control quality at each production stage rather than relying only on final visual sorting. Incoming material is checked against the agreed alloy and temper requirements. During blanking, we monitor diameter, edge quality, and stacking condition. Before shipment, we inspect the surface, verify quantity, and confirm that labels and packing match the purchase order.

Packaging is selected according to circle diameter, thickness, quantity per pallet, transport route, and customer handling method. Small and medium aluminum discs may be packed in stacks with paper interleaving and protective wrapping. Large-sized circles can be secured using reinforced pallet structures to reduce movement during transit. We provide export-grade wooden pallets, moisture-resistant wrapping, corner protection, and clear product identification where required.

Material test certificates, packing lists, commercial invoices, certificates of origin, and other export documents can be prepared according to the agreed order terms.

Ordering Information

To quote H24 1050, 1060, or 1100 aluminum alloy circles accurately, please provide the alloy, temper, thickness, diameter, required quantity, surface expectation, end application, and destination port or delivery location. If ASTM B209 compliance or another standard is required, the applicable clauses and test requirements should be identified in the inquiry.

Our manufacturing team evaluates each order based on practical production conditions, including blanking layout, coil width, tooling availability, dimensional tolerance, surface requirements, and packaging method. This approach enables us to supply bright surface aluminum circles that are technically aligned with the customer's forming process and final product requirements.

+86-18703635966 sales@alummc.com 8618703635966

Copyright © 2026 By HAOMEI Aluminum CO., LTD. All Rights Reserved. Sitemap