No.14 Waihuan Road, CBD, Zhengzhou, China
+86-18703635966
As an aluminum circle manufacturer in China, we produce hot-rolled and cold-rolled aluminum discs for cookware, lighting, traffic signs, electrical components, and deep-drawn industrial parts. Our production is based on controlled coil selection, precision blanking, surface inspection, and packaging methods designed for international B2B supply.
Aluminum discs, also called aluminum circles or aluminum wafers, are round blanks processed from aluminum sheet and coil. Their forming performance depends not only on alloy and temper, but also on the rolling route, grain structure, thickness tolerance, edge condition, and surface cleanliness. For this reason, we match hot-rolled or cold-rolled material to the final forming method and application requirements of each customer.

The selection between hot-rolled aluminum discs and cold-rolled aluminum discs should be made according to the required diameter, thickness, drawing depth, finished appearance, and mechanical performance.
Hot-rolled aluminum coil is produced after aluminum slabs are heated and rolled at elevated temperatures. This process supports larger thicknesses and can provide a favorable grain structure for deep drawing applications. For cookware bodies, pressure cookers, stockpots, and other components requiring significant deformation, hot-rolled aluminum discs are often selected because of their stable drawing behavior and low risk of cracking when the proper temper is used.
Cold-rolled aluminum coil is processed at or near room temperature after hot rolling. It generally offers improved thickness consistency, a smoother surface, and suitable mechanical properties for applications requiring controlled dimensions and a clean appearance. Cold-rolled aluminum discs are widely used for lampshades, signs, reflectors, electronic housings, bottle caps, and moderate-depth drawn products.
Our engineering team reviews the forming route before production. For deep drawing, we focus on elongation, earing behavior, surface lubrication compatibility, and edge quality. For spinning, stamping, anodizing, or coating, we prioritize flatness, surface finish, thickness tolerance, and dimensional consistency.
We manufacture aluminum circle discs primarily in the 1000 series, including 1050, 1060, 1070, 1100, and 1200 aluminum. These commercially pure aluminum grades provide excellent corrosion resistance, thermal conductivity, electrical conductivity, and workability.
For general cookware and deep-drawing applications, 1050 and 1060 grades are commonly specified. Our 1050 Aluminum Circle is suitable for cookware, lighting, and general metal forming where high ductility is required. For customers seeking slightly higher aluminum purity and reliable processing behavior, our 1060 Aluminium Circle is widely used in cooking utensils, lamp components, and spun products.
The final temper is selected based on the forming process. O temper is generally used for deep drawing and spinning because it provides maximum softness and elongation. H12, H14, H22, and H24 tempers are appropriate for applications requiring increased strength, shape retention, or lower deformation during processing.
| Parameter | Standard Production Range | Notes |
|---|---|---|
| Alloy | 1050, 1060, 1070, 1100, 1200 | Other grades available upon technical review |
| Aluminum content | 99.0% to 99.7% minimum, depending on alloy | According to applicable alloy specification |
| Rolling route | Hot-rolled or cold-rolled | Selected by forming and surface requirements |
| Thickness | 0.30 mm to 6.00 mm | Heavier gauges available for selected diameters |
| Diameter | 80 mm to 1,500 mm | Custom diameters can be produced |
| Temper | O, H12, H14, H22, H24 | O temper is common for deep drawing |
| Surface | Mill finish, bright, brushed, coated-ready | Protective film available if required |
| Diameter tolerance | According to customer specification | Controlled through precision blanking |
| Edge condition | Smooth, burr-controlled edge | Important for spinning and stamping |
| Packing | Paper interleaf, plastic protection, wooden pallets | Export-oriented packaging options |
Our aluminum disc manufacturing process begins with verified aluminum coil. We inspect incoming material for alloy identity, thickness, surface condition, and coil quality before it enters blanking production. Depending on the order specification, coils are slit, leveled, lubricated where necessary, and fed into precision punching equipment.
The principal manufacturing steps include:

Cookware manufacturers require aluminum discs that can withstand drawing, spinning, trimming, polishing, coating, and repeated thermal use. A disc that appears acceptable before forming may still create problems if thickness variation, low elongation, coarse grains, or sharp burrs are present.
For deep-drawn cookware, hot-rolled aluminum discs in O temper are commonly used when the product design involves substantial wall height or complex forming. The objective is to maintain consistent material flow during pressing and reduce the chance of rim cracking, wrinkling, or uneven wall thickness.
Cold-rolled aluminum discs can be an effective choice for shallow-drawn cookware, lids, pans, lamp reflectors, and decorative applications where a smooth surface and controlled gauge are important. We can also provide discs for non-stick cookware production, where the base material must be compatible with surface preparation and coating operations.

Our quality control procedures are designed around the practical requirements of aluminum processing plants. Each order is checked against the agreed technical specification before release. We do not treat aluminum circles as generic blanks, because performance in downstream forming is directly affected by material consistency.
Key inspection items include:
For repeat supply programs, we retain process parameters and approved samples to help maintain consistency from batch to batch. Customers may provide drawings, target mechanical properties, forming samples, or application details so that our factory can recommend the appropriate alloy, temper, and rolling route.
Our hot-rolled and cold-rolled aluminum discs are supplied to manufacturers in several industrial sectors:
For applications involving anodizing, painting, polishing, or coating, customers should specify the required surface standard at the quotation stage. This allows us to select appropriate coil material and inspection criteria.
Aluminum discs must remain dry, clean, and protected against movement during transport. We use paper interleaving, plastic wrapping, moisture protection where needed, edge guards, and reinforced wooden pallets. Vertical or horizontal packing can be arranged according to disc diameter, thickness, handling equipment, and container loading requirements.
Before confirming an order, we recommend that customers provide the alloy, temper, thickness, diameter, intended application, monthly quantity, and destination port. For deep drawing or spinning projects, information about draw depth, tooling type, lubricant, and post-processing is also valuable. This enables our manufacturing team to supply aluminum circle discs that are aligned with the actual production process rather than only a basic dimensional requirement.
As a direct aluminum circle factory in China, we support customers with stable production planning, technical communication, customized specifications, and export-ready packaging for hot-rolled and cold-rolled aluminum discs.
Copyright © 2026 By HAOMEI Aluminum CO., LTD. All Rights Reserved. Sitemap